English
Arabic
5.56 Upgraded Form 1 Kit
$350.00 – $380.00
Dimensions:
length: 6.5″ Tube LengthÂ
Outside diameter: 1.5″
Weight: approx. 20oz
Comes with a selection of 1/2x28TPI,5/8×24 TPI, or F.U. adapter entrance caps
Description
Designed with end user in mind this kit can be selected with a 1/2×28, 5/8×24 or Q cherry bomb adapter.
This newly designed form 1 kit utilizes our newest cone 50 degree + 110 degree design and once completed will provide impressive results. With this new redesign we have also lightened nearly every part of our kit and now scales in at 20oz. shipped.
Included in the Kit:
(1) 6.5″ 304 stainless steel tube with a Black Cerakote Finish
(6) 17-4 Stainless Steel 50 degree + 110 degree design Internals
(1) 303 Stainless Steel spacer with Black Nitride finish
(1) 4140 Steel Lightweight exit cap with Black Cerakote Finish
Selection of:
(1) 4140 Steel 1/2×28 TPI entrance Cap with Black Cerakote Finish
(1) 4140 Steel 5/8×24 TPI entrance Cap with Black Cerakote Finish
(1) 4140 Steel F.U. adapter with Black Cerakote Finish
(1) 4140 Steel YHM Ratcheting Adapter with Black Nitrite Finish
Additional information
| Weight | 1.25 lbs |
|---|---|
| Dimensions | 9 × 1.5 in |
| Entrance Cap | 1/2×28 Direct Thread, 5/8×24 Direct Thread, F.U. Female Adapter, YHM Ratcheting Female Adapter |
Video Overview
Phil M. (verified owner) –
If you are thinking of getting into suppressors, THIS IS THE WAY, for a few reasons: it’s a lot faster, and cheaper than commercial suppressors, and you get the satisfaction of building a user serviceable can in your garage. It took 27 days for my tax stamp (eform) to come in. I ordered my kit from QB on a Wednesday morning, it shipped Friday, arrived Saturday, and I was shooting in on Sunday. I don’t know what else you could ask for from a customer service standpoint. The kit itself is exceptional. Machining is excellent, and the Cerakote finish is superb. Engraving is perfect. Turning the kit into a completed suppressor is a 30 minute job. It took longer to swap the baffles in and out of the jig than to actually drill them out. The jig is simple and easy to use, and the drill bit is a quality piece, not some imported cheap steel junk. As for the drilling, slow speed, a little oil, and light pressure works best. Let the drill bit do the work. Each one drilled through in seconds with ease. The kit has some weight to it, but that is one of the trade offs with ANY suppressor on the end of your barrel. After a few drills I was used to the weight and forgot it was there. POI shift was minimal, and sound suppression was excellent. I don’t have a DB meter and the bullet noise is still too loud for bare ears, but the blast of my 11.5″ SBR is completely gone with this thing. All you hear is the buffer spring and the bullet cracking. The only negative to this entire process is, once you build one, you are going to want to build more. A lot more. So get your paperwork in, order your parts kit from QB, and get busy building cans. Suppress Everything!
Dennis (verified owner) –
This turned out to be a great suppressor and great purchase. If you are contemplating one, I don’t think you will be disappointed. It took 28 days for my form1 to be approved, combined with the price and quality of the kit this is the way to go. I got the 5.56 kit and drilled it out .30 caliber to run on both 300 blk and 5.56. The can looks fantastic, finish is great and the engraving is excellent. Most people think it’s a commercially bought can when they see it. Suppression wise I think it performs great. With 300 subs it is easily hearing safe all day, I was pleasantly surprised. On my 5.56 there is a huge sound reduction. Not sure I’d call it hearing safe for shooting a lot, but considering 5.56 just doesn’t suppress all that well this form1 kit is quite good on it. Very easy to drill if you take your time and drill slow. If you are looking for a fun can that doesn’t break the bank and you can enjoy relatively quick, then this is it. Very pleased and I’ll be doing another form1 kit from here soon.